Update Firmware
Firmware updates are managed through the Hi Rokid App. This page should read like an operational checklist: confirm the update conditions first, complete the update without interrupting power or connection, then verify the firmware version.
Before You Update
-
Connect the magnetic charging cable and keep the glasses connected to power throughout the update.
-
Connect the glasses to Wi-Fi through the Hi Rokid App when required for firmware download.
-
Keep the Hi Rokid App open and keep the phone within Bluetooth and Wi-Fi range.
-
Use a phone running iOS 16.0 or later, or Android 12 or later.
How to Update Glasses Firmware
-
Open the Hi Rokid App and confirm that Rokid Glasses are connected.
-
Go to Settings > Glasses System > Check for Updates.
-
If an update is available, review the update conditions shown in the pop-up window.
-
Tap Download. The package size and download time depend on the update and network speed.
-
Tap Install Now after the download completes.
-
Wait for installation to finish. The glasses may restart automatically during the process.
-
After reconnection, verify the firmware version in Settings > Glasses System > Firmware Version.
Important Notes
-
Do not disconnect power during the update.
-
Do not fold the glasses during installation.
-
Do not force restart the glasses while the update is running.
-
If the update fails, restart both the glasses and the Hi Rokid App, then try again under a stable Wi-Fi connection.